Yes, the Chicago Bulls NBA Hitch Cover # OHCC2203 includes a plastic clip to hold the cover in the 2-inch hitch. The clip sides engage with the hitch pin hole in the receiver tube to prevent the cover from dropping out but it is not a lock. A lock such as # e98880 will make it impossible for a thief to remove the cover. view full answer...
While we unfortunately do not carry the Star Wars Rebel Alliance cover for 1-1/4" hitches, we do offer some other Star Wars covers that will fit:
- Star Wars Stormtrooper Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002280R01
- Star Wars Darth Vader Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002282R01
- Star Wars Empire Symbol Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002281R01 view full answer...
Glad to hear that you are enjoying your 5th wheel sliding hitch! We do have some cover options that will work great for you.
If you are just wanting to cover the hitch head you can use the Reese 5th Wheel Trailer Hitch Cover # RP30055. Although it was made specifically for Reese, Draw-Tite and Hidden Hitch classic-style fifth-wheel trailer hitches, it will essentially fit any 5th wheel hitch head. This is reflected in the numerous positive customer feedback that this cover has received.
If... view full answer...
The Firefighter Collage Trailer Hitch Cover, part # SHC805, does not require a locking pin, but you can use one to prevent theft of the hitch cover.
The hitch cover can be installed and held in place with your existing hitch pin and clip or you can use the Hidden Hitch Pin and Clip, part # PC3.
If you want to lock the hitch cover to your hitch you can use the etrailer Hitch Lock, part # e98880. view full answer...
For a rubber hitch cover that'll work with your etrailer Trailer Hitch Receiver # e28AR you can use the etrailer Rubber Hitch Cover for 2" Trailer Hitches # 22282. view full answer...
For your hitch cover on your 1996 Plymouth Neon, I recommend the etrailer.com Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1 # 22281. There is also the Rubber Tube Cover 1-1/4" # 2211. view full answer...
We have a couple options that would work with your B&W Companion 20K Hitch # BWRVK3300. If you're only wanting to cover the head you can use the Reese 5th Wheel Trailer Hitch Cover # RP30055. If you're wanting a cover that drapes over the hitch, I recommend the Classic Accessories Cover # CA80116. This cover measures 24 inches x 24 inches x 18 inches. It will not completely cover your B&W Companion hitch but it will be very close.
If you have any further questions please feel free to reach... view full answer...
Yes, you do need a hitch pin and clip like the Pin and Clip, # PC3, or a lock like the Trailer Hitch Receiver Lock, # e98880, to keep it in the hitch. You do not need both of them.
A hitch cover gets inserted into the 2 inch receiver hitch. Then either the pin and clip or the receiver lock would be inserted through both the hole in the hitch and the wire brackets on the back of the hitch cover to keep it in the hitch.
The lock uses a key to open it and is a good choice to prevent somebody... view full answer...
The largest 5th wheel hitch cover we have is the Classic Accessories Cover # CA80116 which measures 24" x 24" x 18". Even though it is a bit smaller than your 5th wheel hitch we have had a number of customers use it to cover the majority of their 5th wheel hitch (see pictures on product page). So while it isn't a perfect fit, it will do a decent job of covering most of your 5th wheel hitch to help protect it from the elements. view full answer...
The Oregon State Hitch Cover you mentioned, part # AMG102561 is compatible with a 2 inch receiver, which would use a 5/8 inch diameter hitch pin like part # PC3.
However, since hitch covers have a way of walking off, I'd recommend a locking hitch pin like the # e98882. view full answer...
Yes! We do carry a cover for the ProPride 3P weight distribution hitch # PR67QR. That is the Hitch Cover for ProPride 3P Hitches # PR94QR. The cover fits over the ProPride 3P hitch head and 2 weight distribution jacks. It is constructed of marine-grade vinyl and is made 100% in the U.S.A. view full answer...
We do not have custom hitch covers available, but you could always just use the Blank Square Trailer Hitch Cover # AUT-BNK3-S and have your logos engraved. view full answer...
Yes, the Trophy Whitetail Hitch Cover, item # 034092100485, does slide into any 2 inch trailer hitch receiver. You will need either a pin and clip, item # PC3, or a hitch lock, recommended, to secure the cover into your trailer hitch. I have listed a couple of locks below for the 2 inch Receiver.
Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches, # e98880
Tow Ready LifeLong 2 inch Trailer Hitch Receiver Lock - Stainless Steel - Push Button, # e98882 view full answer...
We actually only carry one htich cover for 2-1/2 hitch receivers, part # C22277, which obviously isn't an American Flag.
Instead you can use a reducer like part # 325-GH-007 with a 2 inch cover witih an American flag, part # AMG102202. view full answer...
The Reese 5th Wheel Trailer Hitch Cover # RP30055 is a great option for a cover that will fit the head of the B&W Companion 20K # BWRVK3300.
If you are looking for something that more or less drapes over the hitch then I recommend going with the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116. It measures 24" x 24" x 18" so it might not completely cover your B&W Companion, but it will be close. view full answer...
All hitches with a 1-1/4 inch opening are going to take a ball mount that will take a hitch ball with a 3/4 inch shank. You can use the Hitch Ball with 1-7/8 inch Diameter Ball and Short Shank, 2000 lbs GTW, part # 19256, or the Hitch Ball with 2 inch Diameter Ball and Short Shank, 3,500 lbs GTW, part # 19258. The Curt Class I Trailer Hitch Receiver with Draw bar, part # 11386, does not come with a hitch cover. If you wanted a plain black plug, I recommend the Rubber Tube Cover 1-1/4 inch,... view full answer...
Yes, that is definitely something that can be covered. The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2", part # 391TES317, you installed on your 2022 Tesla Model 3, leaves a hole in your vehicle's lower fascia after installation. This can be taken care of with the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver, part # 306-XA2002. This attaches to your Stealth Hitch via a magnet. It comes equipped seals to keep this cover in place.
I have included product... view full answer...
The Chicago Bears Trailer Receiver Cover, part # FTHB005S will require either a pin and clip, part # PC3, or a hitch lock, such as part # 40107. The pin and clip or hitch lock are not involved with the electrical system, they hold the hitch cover or other accessory in place. view full answer...
It sounds like you're looking for the:
-etrailer Rubber Hitch Cover for 2" Trailer Hitches # 22282.
This rubber cover will cover up the 2" receiver hole on your trailer hitch, and will protect your receiver from dirt and debris.
As far as a completely blank one goes, you're likely not going to find a rubber one as every brand is going to stamp their respective logos on the front, however if you don't mind a metal cover, you can use # F-10P.
If you're also interested in a set of wiring,... view full answer...
The Nissan Titan should use a 2 inch hitch receiver. I have included links below to some LED hitch covers that will fit.
You will also probably want a locking hitch pin to secure your hitch cover in the hitch. You could use part # e98880.
For wiring, use part # 30608. It uses both a 7-Way and a 4-Way connector that will allow you to tow various kinds of trailers in the future if needed. I have included a link to a video of this part being installed on a 2006 Nissan Titan. view full answer...
Go To Results